Handspring Platinum,
Deluxe, Pro, Neo, Visor and Solo Digitizer
Replacement Service
Fits: Handspring Platinum, Deluxe, Pro, Neo, Visor, Solo - This part does not fit Prism or Edge
You purchasing the part and repair service for your PDA
Includes:
- One digitizer
- Installation of the digitizer
This a NEW Digitizer (GlassTop). This item does not include the LCD panel (Screen). If your GlassTop is broken/cracked or does not respond to the stylus but you can still see the display, then you need this item *(see note below). If you cannot see the display, then you may need both the GlassTop and LCD panel or other part.
*If your Digitizer
is soldered to the LCD panel then you need a complete LCD/Digitizer
screen panel. - NOT THIS PART...
If you are not sure then contact us for information
before Purchasing
This service assumes a US shipping address
and all you need is to have the digitizer replaced.
Technical:
|
If the ribbon cable interconnecting
the Digitizer and LCD Module is attached to the LCD Module via
a quick disconnect as shown here, you can use this part. |
 |
|
If the ribbon cable interconnecting
the Digitizer and LCD Module is soldered to the LCD Module as
shown here, you need to replace both the LCD Module and Digitizer.
This is the wrong part! You need a complete screen... |
 |
Most repairs are completed the same day the PDA
is received.
Shipping Instructions
- Carefully pack your unit and send it via insured priority
mail to the address below.
- Do not include the cradle manuals or
software..
- Include your return address and contact number with the
unit.
- Send us an email to confirm that the unit has been shipped
so we know to look for it.
Send to:
Ed Jemmings
PerformancePDA
4715 Meadow Park Lane
Suwanee, Ga. 30024
If your shipping address is outside the United States you need to contact
us before purchasing.
Please email us your questions BEFORE purchasing.
eMail us
at: Sales@PerformancePDA.com
| 
